Belt Tension Adjustment - Nautilus Schwinn IC3 Service Manual

Service manual (68 pages)

Table of Contents

™

NOTICE: This document provides instructions for the adjustment of the Drive Belt Tension on the Schwinn

If you need assistance, please call

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | Printed

in China | © 2018 Nautilus, Inc. | Schwinn and the Schwinn Quality logo are trademarks owned by or licensed to Nautilus, Inc., which are registered or otherwise protected by common law in the United States and other coun-

tries. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause

injury to the service technician or bystanders.

• Keep bystanders and children away from the product being serviced at all times.

• Disconnect all power to the machine before you service it.

• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these

components. Do not try to do heavy or awkward steps on your own.

•

Use only replacement parts and hardware that are supplied or approved by Nautilus. Failure to use Nautilus-approved replacement parts can adversely

affect the safety and functionality of the equipment creating a risk to users and will void the warranty.

•

Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or

replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact

Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them.

• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.

• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.

Tools Required (not included)

#2 Phillips screwdriver

Flathead screwdriver

25mm Crank puller

Adjust the Belt Tension

on the Schwinn

Schwinn

Customer Service(if purchased in US/Canada) or your local distributor (if purchased out

IC3/IC7 Bikes

™

IC3 and IC7 Bikes.

™