Sony Ericsson Cyber-Shot Developer's Manual page 5

To insert the SIM card and charge
the battery
This is the Internet version of the user's guide. © Print only for private use.
1 Insert the SIM card. Make sure the SIM card
is placed under the silvery holders.
2 Place the battery on the back of the phone
with the label side up and the connectors
facing each other.
3 Place the back cover as shown in the picture
and slide it into place.
4 Connect the charger to the phone at the flash
symbol. The flash symbol on the charger plug
must face upwards.
5 It may take up to 30 minutes before the battery
icon appears on the screen.
6
Wait approximately 4 hours or until the battery
icon indicates that the battery is fully charged.
If you do not see the battery icon after this time,
press any key or
7 Remove the charger by tilting the plug upwards.
PIN (Personal Identity Number)
You may need a PIN (Personal Identity Number)
to activate the services in your phone. Your PIN
is provided by your network operator. When you
enter your PIN, the digits are hidden with an *,
unless your PIN starts with the same digits as an
emergency number, for example 112. This is so
Getting started
to activate the screen.
5