Introduction - Sony Ericsson K600 Working Instructions

2 Introduction

SPECIAL TOOLS
No new special tools are introduced but a few other
Sony Ericsson tools are required:
• NTZ 112 459
Torque screwdriver (or equivalent) set
to 20 Ncm ± 6% and 11 Ncm ± 2 Ncm
• NTZ 112 288
Torx bit no. 6 (for 20 Ncm)
• NTZ 112 1052 Phillips bit (for 11 Ncm)
• NTZ 112 521
Flexfilm assembly tool
• NTZ 112 302/2 Front opening tool
STANDARD TOOLS
The following tools have to be locally purchased:
• Dentist hook
• Blunt pair of tweezers
• Guitar pick
ESD EQUIPMENT
Protect the phone from ESD damages whenever it has been opened by using:
• ESD-gloves (cotton gloves)
• ESD-wristband
ADHESIVES
Use a dentist hook or a blunt pair of tweezers to remove old adhesives.
If necessary, clean the surface with isopropyl alcohol before attaching new adhesives.
CAUTIONS
• Keep all contact surfaces clean, no dirt or hand grease!
• Be careful when using tools like the dentist hook, tweezers, opening tools, guitar pick etc.
to avoid scratches or damages to the exterior and interior parts of the phone!
• Be careful not to damage the contact springs on parts like the microphone and vibrator!
• Remember to remove the protection foils on new parts such as the front case and
the LCD!
• Never touch the display glass!
• Use air blow equipment to keep the front window and display module dust free!
3/00021-1/FEA 209 544/94 A

Company Internal Sony Ericsson Mobile Communications AB
K600/K608/V600 Working Instructions - mechanical
3(33)