Step F: Installing The Terminal's Sim Card And Battery - Hughes 9250 Quick Install Manual

Step F: Installing the terminal's SIM card and battery

1. Position the terminal so the battery door is facing
you.
2. Open the battery door.
3. If you have already installed the battery, release and
remove it.
4. Push the button on the left side of the USIM/SIM
card holder to release the holder from its slot.
5. Insert the USIM/SIM card into the card holder
ensuring that it snaps into place.
6. With the card in place, orient the holder with the card's gold
contacts facing down. Insert the holder back into the slot in the
terminal.
6 3500145-0001 Revision A