Sony SCPH-77006 Instruction Manual page 50

Operation
The controller does not function.
, If the software title is compatible only with the analog controller
(DUALSHOCK 2), it will not work properly with the analog controller
®
(DUALSHOCK ). Use a controller that is appropriate for the software title.
®
Refer to the instructions supplied with the software for details.
, Check that the controller is set to the appropriate mode for the software. Refer to
the instructions supplied with the software for details.
, Try using another controller that is compatible with the PlayStation
There may be a problem with the controller in use.
The console does not recognize the memory card. Data cannot be
saved or copied to the memory card.
, Check that the memory card is compatible with the software in use (
, Check that the memory card is inserted securely (
, Check that you are saving the data correctly. Refer to the instructions supplied
with the software for details.
, Data cannot be saved if there is not enough free space on the memory card.
, Try using another memory card. There may be a problem with the memory card
in use.
Data saved on a memory card is corrupted.
, While saving, loading, copying or deleting data, do not attempt any of the
following. Doing so may damage the data.
• Do not remove the memory card or the controller.
• Do not open the disc cover.
• Do not reset the console.
• Do not turn off the console.
, Corrupted data can be deleted in the Browser menu (
50
Troubleshooting
The console does not function properly.
, Static electricity and other similar occurrences may affect the console's
The @/1 indicator flashes in red and the console does not work.
, Do not use the console until the flashing stops. Placing the console in an
2 console.
®
The console makes noise or shakes.
, Because PlayStation
The DVD does not play.
page 17).
, Check that the DVD has the correct region code. Also check that the broadcast
page 18).
, The Parental Control feature may be set on the disc. Follow the on-screen
You forget your password.
, You can clear the password using the following procedure:
page 18).
operation. Turn off the console and unplug it from the electrical outlet. Then,
replug and turn on the console by pressing the @/1/RESET button.
extremely hot location or blocking the console's vents raises the internal
temperature of the console, thereby preventing proper operation.
2 format software titles load at a higher speed than
®
PlayStation format software titles, the noise or vibration may be greater.
®
signal of the disc is compatible with the console (
instructions and temporarily raise the level of Parental Control (
1 Start a DVD, and then stop playback.
Clear Resume Play ( page 23). Use a DVD without the Parental Control
feature.
2
At the Control Panel, select
( page 21).
3 Select "Parental Control", and then press the
The screen to enter a password is displayed. If the screen to register a
password is displayed, no password had been registered before. In this case,
register a new password.
4 Press the SELECT button.
The screen to clear the password is displayed.
page 44).
page 31).
and then press the button
button.