Replacing The Headset Port; Procedure; Post-Requisites - Dell XPS 13 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1. Place the headset port in its slot on the palm-rest assembly.
2. Replace the screw (M1.6x3) that secures the headset port to the palm-rest assembly
3. Reconnect the headset-port cable to the system board.
4. Using the alignment posts, press the right display hinge down on the palm-rest assembly aligning the screw holes on the display hinge
to the screw holes on the palm-rest assembly.
5. Replace the two screws (M2.5x4) that secure the display assembly to the palm-rest assembly.

Post-requisites

Replace the base cover.
30

Replacing the headset port

Replacing the headset port
computer. After working inside your computer, follow the instructions in
18
After