Removing The Base Cover; Procedure - Dell XPS 13 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1. Remove the eight screws (M2x3, Torx) that secure the base cover to the palm-rest assembly.
2. With the computer face-down, open the computer at an angle.
3. Using a plastic scribe, pry the base cover from the palm-rest assembly.
10

Removing the base cover

Removing the base cover
computer. After working inside your computer, follow the instructions in
3
After