View A Wifi Bridge Connection - NETGEAR WAC510 User Manual

Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
5. To save the logs, do the following:
a. Click the Save button.
b. Follow the directions of your browser to save the file to your computer.
6. To download the detailed log entries, do the following:
a. Click the Download Detailed Logs button.
Depending on the size of the file, downloading the detailed log entries might
take several minutes.
b. Follow the directions of your browser to save the file to your computer.
7. To refresh the log entries onscreen, click the Refresh button.
WARNING: After you clear the log entries, you can no longer save or download
them.
8. To clear the log entries, click the Clear button.

View a WiFi bridge connection

You can view whether a WiFi bridge is established and view the function (master or
slave), MAC addresses, and IP addresses of the access points that form the WiFi bridge.
To view a WiFi bridge connection:
1. Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 41.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight app or Insight Cloud portal, enter the
Insight network password for that location. For more information, see Connect over
Monitor the Access Point and the
Network
207 User Manual