About the photos used for "descriptions of the DISASSEMBLY" section
•
The shooting direction of each photograph used herein is indicated on the left side of the respective photograph as
"Shooting direction: ***".
•
Refer to the diagram below about the shooting direction of each photograph.
•
Photographs with no shooting direction indicated were taken from the top of the set.
The viewpoint of each photograph
(Shooting direction X)
[View from the top]
Shooting direction: C
1. FRONT PANEL ASSY
Proceeding :
TOP COVER
(1) Remove the screws.
Shooting direction: D
(2) Cut the wire clamp band, then remove the style pin and screws. Disconnect the connector wires.
Shooting direction: B
Shooting direction: A
→ FRONT PANEL ASSY
View from the bottom
cut
STYLE PIN
N6001
N3001
BN302
N7501
cut
STYLE PIN
N3002
cut
12
Front side
Shooting direction: D
Shooting direction: C
cut
N8504
N8502