Using The Analog Controller; Vibration Function - Sony PlayStation PlayStation 2 Instruction Manual

When not intending to play a game for an
extended period of time
Turn the power off at the MAIN POWER
switch on the back of the console, and
disconnect the AC power plug from the
electrical socket.
Changing from one game to
another
There is no need to turn off the console when
you want to change games.
1
Press the A button.
......
The disc tray opens.
2
Remove the disc.
......
3
Place a new disc in the disc tray.
......
4
Press the A button.
......
The disc tray closes.
5
Press the 1/RESET button briefly to reset.
......
(Warning: holding the 1/RESET button
down for any length of time may cause the
console to go into standby mode.)
After the start-up screen, screen 2 or 3
appears and the game begins.
5
1,4
2,3
Tip
With a multi-disc game, follow steps 1 through 4 to switch
discs. Refer to the software manual for details.

Using the analog controller

Differences between the analog
controller (DUALSHOCK 2) and
®
analog controller (DUALSHOCK
®
1 Analog controller (DUALSHOCK 2)
®
(supplied / sold separately)
•The analog controller (DUALSHOCK 2) can
®
be used with PlayStation 2 and PlayStation
®
format software.
•You can switch between digital and analog
modes. When the controller is in analog
mode, the following buttons and sticks may
operate in analog fashion depending on the
features supported by the software title. Refer
to the software manual for details.
PlayStation 2 format software
®
Directional buttons / ¢ , a , ✕ , s buttons /
left analog stick / right analog stick / L1, R1,
L2, R2 buttons
PlayStation format software
®
Left analog stick / right analog stick
•You can enjoy the vibration function.
2 Analog controller (DUALSHOCK )
®
(sold separately)
•The analog controller (DUALSHOCK ) can
®
be used with PlayStation 2 and PlayStation
®
format software.
Digital mode (indicator: off)
L2 button
L1 button
SELECT START
button button
Directional
buttons
ANALOG mode button
•You can switch between digital and analog
modes. When in analog mode, you can enjoy
the analog operation of the left analog stick
) and right analog stick.
PlayStation 2 format software
®
Left analog stick / right analog stick
PlayStation format software
®
Left analog stick / right analog stick
•You can enjoy the vibration function.
®
Mode switching and the mode
indicator
The analog controller (DUALSHOCK
analog controller (DUALSHOCK
switched between two modes by pressing the
ANALOG mode button.
Each time the ANALOG mode button is
pressed, the mode changes as follows:
Digital mode (indicator: off)
Xx
Analog mode (indicator: red)
Note
Switch to the appropriate mode for use.
Note however, that some software makes this adjustment
automatically. In such cases, the ANALOG mode button is
overridden by the software. For details, refer to the
software manual.
®
Analog mode (indicator: red)
R2 button
R1 button
¢ button
a button
✕ button
s button
Mode indicator: Off

Vibration function

The analog controller (DUALSHOCK
analog controller (DUALSHOCK
a vibration function when the function is
supported by the software title. The vibration
function can be set to ON or OFF on the
software option screen.
Notes
• When the analog controller (DUALSHOCK
analog controller (DUALSHOCK
turn the console off or unplug the controller from the
console.
• Before using the vibration function, please read "Notes
2) and
® on safety when using the analog controller
(DUALSHOCK 2) and analog controller
) can be ®
®
(DUALSHOCK )" on page 2.
®
Before using the analog
controller (DUALSHOCK
analog controller (DUALSHOCK
Rotate the analog sticks once with your thumbs as
if drawing a circle, as shown in the diagram above.
Do not twist the analog sticks.
L2 button R2 button
L1 button
SELECT START
button button
Directional
buttons
Left analog stick /
L3 button*
ANALOG mode button
Mode indicator: Red
* The R3 button and the L3 button function when the stick is pressed.
11
US
2) and
®
) both feature
®
2) and
®
) is not being used,
®
2) and
®
)
®
R1 button
¢ button
a button
✕ button
s button
Right analog stick /
R3 button*