Sony SVT-168E Operating Instructions Manual page 42

Searching for the Time and Date — Time/Date Search
3
Press REC/PLAY SPEED + or – to set the date
and press MENU B to move the flashing to the
time. Press + or – to set the time.
4
Press FF M or REW m.
The cassette stops at the portion when you set the
time and date and the still picture playback is
displayed.
The time/date search mode is automatically
cleared.
Notes
• If the tape reaches its end during searching, the tape is
rewound and the unit enters the stop mode at the beginning
of the tape.
• Be sure to set T/D SEARCH on the GENERAL SET menu
to the same setting as the tape was recorded with.
Otherwise, searching for the time and date cannot be done
properly.
42