Table of Contents
Advertisement
Symptom
A tape cannot be inserted.
The remote commander does
not function.
The tracking indicator does not
appear on the screen.
The VCR needs to be cleaned.
Remedy
• Check that a tape isn't already in the tape
compartment.
• Make sure you are pointing the remote commander
at the remote sensor on the VCR.
• Replace all the batteries in the remote commander
with new ones if they are weak.
• Make sure the TV / VIDEO remote control switch
is set correctly.
• The recording condition of the tape is very poor
and tracking cannot be adjusted, or the NTSC
system is being used.
• Clean the cabinet, panel and controls with a dry,
soft cloth, or a soft cloth slightly moistened with a
mild detergent solution. Do not use any type of
solvent, such as alcohol or benzine.
Additional Information
67
Advertisement
Table of Contents
