Room Temp. Mode - Saturn Navien LST-17K Instruction

Room Temp. Mode

Press the Mode button repeatedly,
until is displayed.
blinks when selecting
Room Temp. Mode
CAUTION
If a room thermostat is programmed with Room Temp. Mode
and it is placed in the following places when using Room Temp.
mode, it may cause some errors to recognize temperature.
1. Frequently opened and closed door and drafty place.
2. A place where direct sunlight is e ected and high humidity.
3. A place under direct in uence from heat, such as radiator.
In that case, Heating Water Temp. is recommended.
Set the heating temp.
with +/- button.
When blinks, set the desired
heating temp. between 10~40
adjusting +/- button, after a while,
it is automatically saved.
Heating temp. can be set by 1 .
After the setting is done,
is on and current room temp.
is displayed.
by
13