Quick Start Guide; Connecting The Vcr - Sony ShowView SLV-SE230D Operating Instructions Manual

1 Connecting the VCR

1
2
:Signal flow
... Connect the aerial to
1
... Connect and the aerial input of your
2
TV using the supplied aerial cable.
... For better picture and sound, connect
3
LINE-1 (EURO AV) to your TV using a
Scart cable if your TV has a Scart
(EURO-AV) connector.
... Connect the mains lead to the mains.
4
2 Using the Auto Set Up function
... Turn on your TV and set it to the video
1
channel.
If your TV does not have a Scart
(EURO-AV) connector, tune the TV to
channel 32 (the initial RF channel of this
VCR). Refer to your TV's manual for
TV tuning instructions. If the picture
does not appear clearly, see "To change
the RF channel."
... Connect the mains lead to the mains.
2
Sony Corporation

Quick Start Guide

LINE-1 4
(EURO AV)
3
of the VCR.
... Press M/m/</, to select a language,
3
then press OK.
... When the COUNTRY SELECTION
4
menu appears, press M/m/</, to
select a country, then press OK.
When all of the receivable channels are
preset, the menu disappears from the TV
screen. You can rearrange the programme
position in any order (see "Changing/
disabling programme positions").
3 Setting the clock
... Press MENU, then press M/m/</, to
1
highlight CLOCK SET and press OK.
... Press M/m to set the hour, then press ,.
2
... Press M/m to set the minutes. Set the
3
day, month, and year in sequence by
pressing , to select the item to be set,
and press M/m to select the digits, then
press OK.
... Press MENU.
4
Now you can operate your VCR.
AC68-02034D