Sony SLV-SE230G/I Operating Instructions Manual page 42

7
DIAL TIMER
8
DIAL TIMER
INPUT SELECT
9
DIAL TIMER
To return to the previous step
To return to the previous step, press the PROGRAM + and – buttons on the
VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x (stop).
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 34).
• Display tape information on the TV screen (page 37).
• Check the timer settings (page 55).
• Watch another TV programme (page 37).
42 Recording TV programmes using the Dial Timer (SLV-SE830G only)
Press DIAL TIMER.
The programme position or LINE input appears in the display
window.
Turn DIAL TIMER to set the programme position.
To record from other equipment connected to one or more of the
LINE inputs, turn
display the connected line in the display window.
Press DIAL TIMER to complete the setting.
"OK" appears in the display window for about five seconds.
The indicator appears in the display window and the VCR stands
by for recording.
To record from other equipment, leave the connected equipment
switched on.
DIAL TIMER or press INPUT SELECT to
indicator