Setting The Recording Duration Time - Sony SLV-N51 Operating Instructions Manual

Setting the recording duration time

After you have started recording, you can
have the VCR stop recording automatically
after a specified duration.
1
While recording, press z REC.
The TIMER indicator appears in the display window.
2
Press z REC repeatedly to set the duration time.
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press z REC repeatedly to set a new duration time.
To cancel the duration
Press z REC repeatedly until the TIMER indicator disappears and the VCR returns
to normal recording mode.
To stop while recording
Press x STOP.
Note
• You cannot display the current tape time in the display window when setting the recording
duration time.
0:30 1:00
VCR
Normal recording
3:30 4:00
Setting the recording duration time
z REC
TIMER
39