Instrument
1. Shut-off any external supplies, and depressurize system by slowly opening both Inlet
2. Disconnect external supplies.
3. Remove screw-in handle from handpump arm (if fitted) and store in tool roll.
4. Refit instrument lid, ensuring that the hinges are correctly engaged, and secure with
Weights
1. Starting with the largest increments first, stack all appropriate weights in the wooden
2. Pass the threaded rod of the weight clamp assembly down through the center of the
3. Secure the weights by screwing the clamp assembly in clockwise, ensuring that the
4. Close lid and secure with catches at front.
info@Fluke-Direct.com
and Exhaust valves.
toggle clips at the sides.
weight case.
weight stack, and locate in the base of the weight box.
stepped rim of the clamping disc locates correctly in the center of the weight stack.
The weight set is heavy (can be up to 80 lbs/36 kg per individual
box) so care must be taken when moving it. Both handles must
be used when lifting the set for stability, and we recommend
that it be carried between two people.
Fluke-Direct
Storage & Transportation
W Warning
Chapter 7
.com
1.888.610.7664
7-1