Sony SLV-795HF Operating Instructions Manual page 8

Step 3: Hookups (continued)
Audio/video (A/V) hookup
If your TV has audio/video (A/V) input jacks, you will get a better picture
and sound if you hook up your VCR using these connections. In addition,
for a true "home theater" experience, you should connect the audio outputs
of your VCR or TV to your stereo system. If your TV doesn't have A/V
inputs, see the following pages for antenna or cable hookups.
If your TV has the S-Link * (A/V bus control) function, hook up your VCR
using the connection shown on page 9. Your TV will automatically switch to
the A/V inputs for your VCR when you play back or operate menu on the
VCR.
If you're not planning to use your VCR to record programs, you're finished
setting up the VCR after you've made the connections shown on pages 8 and
9. If you want to record off-air or off your cable TV system, complete these
connections first, and then go to the following pages for antenna or cable
hookups.
* S-Link
A Use this hookup if your TV has stereo jacks
VCR
AUDIO VIDEO
LINE-1 IN
LINE OUT
Audio/video cable (supplied)
* Do not connect the miniplugs for this hookup.
B Use this hookup if your TV doesn't have stereo jacks
VCR
AUDIO VIDEO
LINE-1 IN
LINE OUT
Note
• To play a tape in stereo, you must use the A/V connection.
8
Getting Started
is a trademark of Sony Corporation.
*
*
TV
IN
VIDEO AUDIO OUT
AUDIO
TV
IN
VIDEO
AUDIO
Pages 8 to 9
Stereo receiver
AUX IN
Stereo receiver
AUX IN