Sony SLV-795HF Operating Instructions Manual page 29

Hookup 6: VCR Plus+ channel setup
1
Press MENU and select SET VCR Plus+
CHANNELS.
2
Push Joystick to ?// to select AUTO
and press the Joystick (EXECUTE).
3
Press POWER to turn off the VCR.
The VCR receives the program information signal from 0:00 am to 5:00 am
while the VCR is turned off, and set up the channel for VCR Plus+ recording.
After channel setup is finished, you can record TV programs using VCR
Plus+. For details, see page 48.
Notes
• To use the smart channel mapping feature, set the A/B switch to A.
• It takes about 1 hour to complete channel setup.
• The VCR can receive the program information signal only while the VCR is turned
off and no timer recordings are set.
• If the channels in your area don't carry the program information signals, set the
program guide channels manually. For details, see page 50.
• If the CH MAP SELECT menu appears the first time you turn on the VCR after
finishing channel setup, select the MAP number. For details, see page 49.
VCR Plus+ channel setup for scrambled channels
To set the program guide channels for scrambled channels, enter all the
scrambled channels you want to record and the cable box output channel
(usually 2, 3, or 4) after finishing smart channel mapping. For details, see
page 50.
1 Find the VCR Plus+ Channel Listing in your
program guide. For details, see page 47.
2 Press MENU and select SET VCR Plus+
CHANNELS, then press the Joystick
(EXECUTE).
MENU
TIMER SET / CHECK
TUNER PRESET
CLOCK SET
LANGUAGE
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
ADVANCED OPTIONS
Use t o s e l e c t a n
i t e m, t h e n p u s h EXECUTE
SMART CHANNEL MAPPING
AUTO MANUAL
Use t o s e l e c t
Th e n p u s h EXECUTE
Pu s h MENU t o q u i t
MENU
TIMER SET / CHECK
TUNER PRESET
CLOCK SET
LANGUAGE
SET VCR Plus+ CHANNELS
CABLE BOX CONTROL
ADVANCED OPTIONS
Use t o s e l e c t a n
i t e m, t h e n p u s h EXECUTE
continued
Getting Started
29