Switching The Sound To Be Sent To The Remote Party; Switching The Picture Displayed On The Tv Monitor - Sony PCS-1/1P Operating Instructions Manual

Switching the Picture Displayed on the TV Monitor

Each press of the DISPLAY button on the Remote Commander switches the
picture displayed on the monitor screen as follows:
Notes
• A still image is displayed only when it has been transmitted or received.
• An RGB picture from the computer connected to the optional PCS-DSB1 Data
Solution Box is displayed only when:
– the RGB signal is being transmitted or received via the Data Solution Box.
– the RGB signal is output to the monitor connected to the RGB OUT connector on
the Data Solution Box.
• A picture on a whiteboard is displayed only when notes written on a whiteboard are
transmitted or received.
For details, see "Using Audio/Video Signal from the Connected Equipment for
a Conference" on page 136 and "Video conference Using a Whiteboard" on
page 144.

Switching the Sound to Be Sent to the Remote Party

You can switch the sound sent to the remote party between the sound from the
microphone and that from the connected equipment. Use "Input Select" in the
Audio Setup menu.
For details on the "Input Select" setting, see page 48.
Picture shot by the local or
remote camera
DISPLAY button
Still image transmitted or
received
RGB picture
Picture on a whiteboard
Selecting the Input Picture and Sound
97