Sony HVR-M25E Operating Instructions Manual page 71

Icon/Menu Submenu
IN/OUT REC
EE/PB SEL
(page 14)
480i LEVEL
DISPLAY SET menu
Icon/Menu Submenu
DISPLAY COUNTER
SET SET
Setting
Sets the stop, fast-forward and rewind modes.
EE : Outputs EE picture and EE sound.
PB : Mutes the image and sound.
Note
If this item is set to PB, the output from the unit will be as follows when you press any of the
REC, DUPLICATE PLUS, or AUDIO DUB buttons separately when the unit is stopped
(unless the cassette has been write-protected).
Image
REC button EE picture of
the input image
DUPLICATE Image input to
PLUS HDV/DV jack
b)
button
AUDIO Mute screen
DUB (black)
button
Mute screen
No button
(black)
is pressed
a) Set AUDIO OUTPUT SELECT switch appropriately.
b) When INPUT SELECT switch is set to HDV/DV.
Selects the component output level of luminance and chrominance from either BETACAM
or SMPTE signals when the component output is set to 480i.
BETACAM : Sets COMPONENT OUT jacks to BETACAM level.
SMPTE : Sets COMPONENT OUT jacks to SMPTE level.
Note
For details on COMPONENT OUT jacks specifications, see page 100.
Setting
Selects the appearance of the time counter.
DISPLAY
ON : Enables the time counter display.
OFF : Disables the time counter display.
SIZE
LARGE : Displays the time counter in large letters.
SMALL : Displays the time counter in small letters.
COLOR
TYPE 1 : Displays the time counter with color type 1.
TYPE 2 : Displays the time counter with color type 2.
TYPE 3 : Displays the time counter with color type 3.
TYPE 4 : Displays the time counter with color type 4.
Sound Time code
EE sound of the
input sound
(CH-1/2) a)
Sound input to
HDV/DV jack
(See page 53)
EE sound of the
input sound
(CH-3/4) a)
Mute
(no sound)
Chapter 5 Adjusting and Setting Through Menus
(Continued)
71