Sony GV-HD700E Operating Manual page 16

Step 2: Preparing the power supply (Continued)
To remove:
When storing the battery pack
Fully discharge the battery pack before
storing it for an extended period (see page
82 for details of storage).
To check the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISPLAY/BATT INFO.
After a while, the approximate available
playback time and battery information
appear for about 7 seconds. You can view
the battery information for up to 20 seconds
by pressing DISPLAY/BATT INFO again,
while the information is displayed.
Remaining battery (approx.)
Available playback time (approx.)
16
vBATT
RELEASE
button
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Battery pack
NP-FM50
NP-QM71D
NP-QM91D
NP-F570 (supplied)
NP-F770
NP-F970
b Notes
• You cannot use the battery pack NP-FM30/
F330/F530/500/510/710 on the VCR. Do not
attach an incompatible battery pack forcibly.
Doing so may cause the VCR to malfunction.
Available playback time
Approximate time (min.) available when
you use a fully charged battery pack.
HDV format pictures (GV-HD700/1)
LCD panel
Battery pack
opened
NP-FM50
NP-QM71D
NP-QM91D
NP-F570
(supplied)
NP-F770
NP-F970
Charging time
150
260
360
260
370
485
LCD panel
closed
75 115
190 285
290 430
150 225
310 460
465 690