KTM 390 Duke Series 2019 Owner's Manual page 134

12 SERVICE WORK ON THE CHASSIS
132
–
Check the chain sliding guard for wear.
»
If in area
ble from above:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the screw of the chain sliding guard.
Guideline
Screw, chain
guard
F00799-10
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
( p. 116)
C
by the chain sliding guard screw
M5 7 Nm (5.2 lbf ft)
1
is visi-
Loctite 243™
®