Resetting The Date And Time; Reajuste De La Fecha Y La Hora - Sony CCD-TRV11 Operation Manual (primary manual) Operation Manual

Analog camcorders: video camera recorder 8mm
Hide thumbs Also See for CCD-TRV11 Operation Manual (primary manual):
Table of Contents

Advertisement

Resetting the date
and time
Reset the date and time using the DATE(+) and
TIME(NEXT) buttons.
(1) Set the POWER switch to CAMERA.
(2) Turn STANDBY up.
(3) While pressing PUSH OPEN, open the LCD
panel.
(4) Press DATE(+) and TIME(NEXT)
simultaneously until the year indicator flashes
on the LCD screen or in the viewfinder.
(5) Set year, month, day, time, minute by pressing
DATE(+) and TIME(NEXT). Note that when
you keep DATE(+) pressed, the digits advance
faster.
CAMERA
OFF
PLAYER
To correct the date and time setting
Repeat steps 4 and 5.
To check the date and time
Press DATE(+) to display the date indicator. Press
TIME(NEXT) to display the time indicator. When
you press the same button again, the indicator
goes out.
The year indicator changes as follows:
Note on the time indicator
The internal clock of the camcorder operates on a
12-hour cycle.
12:00:00 AM stands for midnight
12:00:00 PM stands for noon.
Reajuste de la fecha
y la hora
Reajuste la fecha y la hora utilizando las teclas
DATE(+) y TIME(NEXT).
(1) Deslice el selector POWER hasta CAMERA.
(2) Gire STANDBY hacia arriba.
(3) Manteniendo presionada PUSH OPEN, abra
la pantalla de cristal líquido.
(4) Presione simultáneamente DATE(+) y
TIME(NEXT) hasta que en la pantalla de
cristal líquido o en el visor parpadee el
indicador del año.
(5) Ajuste el año, mes, día, hora y minutos
presionando DATE(+) y TIME(NEXT). Tenga
en cuenta que si mantiene presionada
DATE(+), los dígitos avanzarán con mayor
rapidez.
Para corregir los ajustes de la fecha y
la hora
Repita los pasos 4 y 5.
Para comprobar la fecha y la hora
Presione DATE(+) de forma que se visualice el
indicador de la fecha. Presione TIME(NEXT) para
visualizar el indicador de la hora. Cuando vuelva
a presionar la misma tecla, el indicador
desaparecerá.
El indicador del año cambiará como
sigue:
Nota sobre el indicador de la hora
El reloj interno de la videocámara trabaja con un
ciclo de 12 horas.
12:00:00 AM es la medianoche.
12:00:00 PM es el mediodía.
CCD-TRV11/TRV21 3-856-152-52.E/S
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ccd-trv21

Table of Contents