Tv(Digital) - Sony RM-VL600T Operating Instructions Manual

Table of Preset Functions
(continued)

TV(DIGITAL)

KEY DISPLAY FUNCTION
01 To turn on and off.
12qs To change the
1 – 9, 0, ENT, programme. For
-, 1 –, 2 – example, to change to
programme 5, press 0
and 5 (or, press 5 and
ENT).
qat (INPUT To change the input
SELECT) mode.
qjMENU To call up the MENU
display.
qk V To move the cursor
upward.
qk v To move the cursor
downward.
qk b To move the cursor to
the right.
qk B To move the cursor to
the left.
qk OK To enter the selection of
the MENU display.
5 (PAP) To divide the screen into
two for watching two
pictures simultaneously.
qfPROGRAM Programme up: +
+/–
Programme down: –
To operate JUMP,
qh
FLASHBACK or
CHANNEL RETURN
function on the TV
depending on the setting
of the TV's
manufacturer.
42 +/– Volume up: +
Volume down: –
GB
40
KEY DISPLAY FUNCTION
6% To mute the volume on
the TV. Press again to
turn muting off.
7GUIDE To use the programme
(EPG) guide.
8RETURN To exit the mode.
3DIGITAL To select DIGITAL.
qlTOOLS To go into the OPTION
setting mode.
qdANALOG To select ANALOG.
qg/ To switch to Teletext.
(TELETEXT)
9RED (m ), Fastext buttons
GREEN (N ),
YELLOW
(M ), BLUE
( x)
Using Fastext
With Fastext you can access pages
with one key stroke.
When a Fastext page is broadcast,
a colour-coded menu will appear
at the bottom of the screen.
The colours of this menu
correspond to the red, green,
yellow and blue keys on the
Remote Commander.
Press the key which corresponds
to the colour-coded menu.
The page will be displayed after
some seconds.