Appendix; Table Of Preset Functions - Sony RM-AV2100B Operating Instructions (primary manual) Operating Instructions Manual

Appendix

Table of Preset
Functions
Note
There may be some components or functions
that cannot be operated with this Commander.
TV
KEY DISPLAY
POWER
1 – 9, 0, ENTER
INPUT
DISPLAY
SLEEP
WIDE
MENU
M
m
,
<
EXECUTE
PIP ON/OFF
PIP OFF
PIP CH+
PIP INPUT
PIP MOVE
PIP STILL
PIP SWAP
58
FUNCTION
To turn the power on/off
To change the channel
For example, to change to
channel 5, press 0 and 5 (or,
press 5 and ENTER)
To change the input mode
To display the current
channel on TV
To operate SLEEP function on
the TV (works only for a TV
with SLEEP function)
To switch to WIDE
To call up the MENU display
To move the cursor upward
To move the cursor
downward
To move the cursor to the
right
To move the cursor to the left
To enter the selection of the
MENU display
To turn on/off the "window"
picture*
To turn off the "window"
picture
To change the TV channel in
the "window" picture
To change the input mode of
the "window" picture
To move the location of the
"window" picture
To freeze the "window"
picture
To swap the "window"
picture
KEY DISPLAY FUNCTION
CHANNEL +/– Channel up: +
Channel down: –
RECALL To operate JUMP,
FLASHBACK or CHANNEL
RETURN function on the TV
depending on the setting of
the TV's manufacturer
VOLUME +/– Volume up: +
Volume down: –
MUTING To mute the volume on the
TV. Press again to turn
muting off.
* If the "window" picture does not turn off this
way, try pressing the ENTER key while
pressing the PIP ON/OFF key.