Getting Started; Installing The Batteries; When To Replace The Batteries - Sony RM-AV2000T Operating Instructions Manual

Getting Started

Installing the Batteries

Slide open the battery compartment lid
and insert six R6 (size AA) batteries (not
supplied). Be sure to line up the + and –
on the batteries with the + and – on the
battery compartment.
}
]
} ]
(for backlight)
]
}
]
]
}
}
]
}
(for remote control
operation)

When to replace the batteries

Batteries for remote control
operation (Four R6 (size AA)
batteries)
Under normal conditions, batteries will
last up to six months. If the Commander
does not operate properly, batteries
might be worn out and i is displayed
on the LCD touch panel. When the
display dims, replace the batteries with
new ones.
Note
Do not take more than one hour to replace the
batteries; otherwise, your setting of the code
numbers (page 7) and learned remote control
signals (page 12) will be erased.
Batteries for backlight (Two R6
(size AA) batteries)
When the backlight for the touch keys
grows dim, replace its batteries.
Notes on batteries
• Do not mix old batteries with new ones or
mix different types of batteries together.
• If the electrolyte inside the battery should
leak, wipe the contaminated area of the
battery compartment with a cloth and replace
the old batteries with new ones. To prevent
the electrolyte from leaking, remove the
batteries when you plan not to use the
Commander for a long period of time.
EN
5