Operations; Playing A Record - Sony PS-J20 Operating Instructions Manual

Operations

Playing a Record

1
2
1
Place a record on the platter.
Note
Place only one record on the platter at a time. If two or
more records are stacked on the platter, the stylus will
not make proper contact with the grooves and the
quality of reproduction will be impaired.
2
Press SPEED to select the speed.
3
Remove the protective cover from the cartridge,
and release the stopper from the tone arm.
4
Set the cueing lever backward.
5
Move the tone arm to the desired position over
the record.
6
Set the cueing lever forward.
The tone arm descends slowly to the record and
playback begins.
7
Adjust the volume on your amplifier.
6
To stop playing
Press REJECT.
To pause playback
Set the cueing lever backward to raise stylus off the
4,6
record during playback.
3
5
To listen to a different part of the record
1
3
2
3
REJECT
To play a 17-cm record
Place the supplied 45 r/min adaptor on the spindle.
When you have finished using the adaptor, put it back
in the adaptor tray.
Set the cueing lever backward to raise stylus
during playback.
Move the tone arm to the position you desire.
Set the cueing lever forward.