Powering the Access Point
Figure 2-30
1
Securing screws
2
Wire opening for ground (DC return)
Insert the two-position terminal strip into the DC power opening in the access point case, and carefully
Step 8
push the terminal strip into the internal connector (see
Note
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
2-48
Two-Position Terminal Strip
Ensure that the polarity of the terminal strip properly matches the polarity markings on the
enclosure (see
Figure
2-32)
Chapter 2
3
Wire opening for DC +
Figure
2-31).
Installing the Access Point
OL-30864-01