Troubleshooting - Sony ZS-XN30 Operating Instructions Manual

Personal audio system
Hide thumbs Also See for ZS-XN30:
Table of Contents

Advertisement

Notes on CDs
• Before playing, clean the CD with a
cleaning cloth. Wipe the CD from the
center out.
• Do not use solvents such as benzine,
thinner, commercially available cleaners
or anti-static spray intended for vinyl LPs.
• Do not expose the CD to direct sunlight or
heat sources such as hot air ducts, nor
leave it in a car parked in direct sunlight
as there can be a considerable rise in
temperature inside the car.
• Do not stick paper or sticker on the CD,
nor scratch the surface of the CD.
• After playing, store the CD in its case.
If there is a scratch, dirt or fingerprints on
the CD, it may cause tracking error.
About CD-Rs/CD-RWs
This CD player can play CD-Rs/CD-RWs
recorded in the ATRAC3plus/ATRAC3,
MP3 or CDDA* format, but playback
capability may vary depending on the quality
of the disc and the condition of the recording
device.
* CDDA is the abbreviation for Compact Disc
Digital Audio. It is a recording standard used for
the Audio CDs.
If you have any questions or problems
concerning your player, please consult your
nearest Sony dealer.

Troubleshooting

General
The power is not on.
• Connect the AC power adaptor to a wall
outlet securely.
• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if
they are weak.
The power is not on, and "Battery Error"
is displayed.
• Make sure the batteries are inserted correctly.
There is no audio.
• Adjust the volume.
• Unplug the headphones when listening
through speakers.
Noise is heard.
• Someone is using a portable telephone or
other equipment that emits radio waves near
the player. t Move the portable telephone,
etc., away from the player.
CD Player
"No disc" lights in the display even when
a CD is in place.
• Place the CD with the label surface up.
• The CD-R/CD-RW was not finalized.
Finalize the CD-R/CD-RW with the
recording device.
• There is a problem with the quality of the
CD-R/CD-RW, recording device, or
application software.
• The CD-R/CD-RW is blank.
• Replace all the batteries with new ones if
they are weak.
The CD does not play.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD
compartment open for about an hour to dry
moisture condensation.
continued
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents