Sony STR-DH800 Operating Instructions Manual page 35

Multi channel av receiver
Hide thumbs Also See for STR-DH800:
Table of Contents

Advertisement

Confirming/saving the
measurement results
1
Confirm the measurement
result.
When the measurement ends, a beep
sounds and the measurement result
appears on the display.
Measurement
Display
result
When the
SAVE EXIT Proceed to step
measurement
process
completes
properly
When the
E -
xxx
measurement
process fails
2
Press AMP and then press V/v
repeatedly to select the item.
Then, press
Item
Explanation
EXIT
Exits the setting process
without saving the
measurement results.
LEVEL INFO
Displays the measurement
result for speaker level.
DIST. INFO
Displays the measurement
result for speaker distance.
PHASE INFO
Displays the phase of each
speaker (in phase/out of
phase). See "When you
select "PHASE INFO""
(page 36).
WARN CHECK Displays warning
concerning the
measurement results. See
"When you select "WARN
CHECK"" (page 37).
SAVE EXIT
Saves the measurement
results and exits the setting
process.
RETRY
Performs the Auto
Calibration again.
Explanation
2.
See "When
xx
:
error codes
appear" (page
36).
.
3
Select "SAVE EXIT" in step 2 to
save the measurement result.
"COMPLETE" appears on the display
and the settings are registered as selected
position number.
4
Press V/v repeatedly to select
CAL TYPE, then press
Calibration
Explanation
type
FULL FLAT
Makes the measurement of
frequency from each
speaker flat.
ENGINEER
Sets the frequency
characteristics to a set that
matches that of the Sony
listening room standard.
FRONT REF
Adjusts the characteristics
of all speakers to match the
characteristics of the front
speaker.
OFF
Sets the Auto Calibration
equalizer level to off.
Tip
The size of a speaker (LARGE/SMALL) is
determined by the low frequency
characteristics.
The measurement results may vary, depending
on the position of the optimizer microphone
and speakers, and the shape of the room. It is
recommended that you follow the
measurement results. However, you can
change those settings in the SPEAKER menu
(page 50). Save the measurement results first,
then try to change the settings if you want.
.
continued
35
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents