8. Removal of Handle Unit
1. Remove the VF CASE L Unit.
2. Unscrew the 4 screws (K) and disconnect the
connector P551 on TOP CONNECT C.B.A., then
remove the HANDLE UNIT.
SCREW (J)
HANDLE UNIT
SCREW (K)
SCREW (K)
SCREW (K)
P551
4mm
BLACK
9. Removal of EVF Unit
1. Remove the Handle Unit.
2. Unscrew the 2 screws (L).
SCREW (L)
3. Make the condition which lift up the EVF Unit as
shown figure and unscrew the 2 screws (M).
4. Disconnect
the
CONNECT C.B.A. and remove the EVF Unit.
EVF UNIT
SCREW (M)
P555
DIS-8
connector
P555
SCREW (M)
SCREW (L) & (M)
4mm
SILVER
on
TOP