About The Indications In The Display - Sony STR-DB895D Operating Instructions Manual

About the indications in the display

1 2
LFE
SP A
SW
SP B
L C R
SL S SR
SBL SBR
SB
qh
A SW: Lights up when the sub woofer selection
is set to "YES" (page 19) and the audio signal
is output from the SUB WOOFER jack. This
indicator does not light up during the 2CH
STEREO mode.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP A/SP B: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
D ; DIGITAL EX: "; DIGITAL" lights up
when the receiver is decoding signals recorded
in the Dolby Digital format.
"; DIGITAL EX" lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to "ANALOG"
(page 41).
GB
32
3 4
; ;
DIGITAL EX
SLEEP OPT COAX
qg qf qd
5 6
PRO LOGIC IIx DTS-ES
96/24
E ; PRO LOGIC IIx: "; PRO LOGIC"
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. "; PRO LOGIC II" lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. "; PRO LOGIC IIx" lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated. However, these
indicators do not light up if both the center and
surround speakers are set to "NO" and you
select a sound field using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding does not function
for DTS format signals and for signals with a
sampling frequency of more than 48 kHz.
F DTS-ES 96/24: "DTS" lights up when DTS
signals are input. "DTS-ES" lights up when
DTS-ES signals are input. "DTS 96/24" lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to "ANALOG" (page 41).
G NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 25–30 for tuner operations.
I DIRECT: Lights up when the ANALOG
DIRECT function is activated.
7
NEO:6
D.RANGE EQ STEREOMONO
qs qa
8 9
RDS
MEMORY
DIRECT
q;