Amplifier Operation; Selecting The Component - Sony STR-DB895D Operating Instructions Manual

Amplifier Operation

Selecting the component

1
Turn INPUT SELECTOR to select the
input.
The selected input appears in the display.
To select the
VCR
Video game player
DVD player
Satellite tuner
MD or tape deck
Super Audio CD or CD
player
Built-in tuner (FM)
Built-in tuner (AM)
Built-in tuner (DAB)
Turntable
* If you have not registered the contents of
broadcast (service components) before you turn
INPUT SELECTOR to select the DAB input,
"DAB TUNE" appears in the display for a
while, then "DAB _ _ _ _" appears.
"PLEASE RUN DAB SCAN FOR DAB
STATION" will then scroll across the display.
In this case, do the DAB INITIAL SCAN
procedure (page 27).
2
Turn on the component and start
playback.
Note
If you select any video components, set the TV's
video input to match the component you selected.
3
Turn MASTER VOLUME –/+ to adjust
the volume.
Note
To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.
GB
24
Display
VIDEO 1 or
VIDEO 2
VIDEO 3
DVD
TV/SAT
MD/TAPE
SA-CD/CD
FM frequency
AM frequency
DAB service
component label*
PHONO
To mute the sound
Press MUTING on the remote.
The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.
To use the headphones
Connect the headphones to the PHONES jack.
• When the headphones are connected, speaker
output is automatically canceled and "SP A"
and "SP B" do not light up in the display.
• When the headphones are connected, you can
select only the following sound fields
(page 38).
– HP 2CH (HEADPHONE 2CH)
– HP DIR (HEADPHONE DIRECT)
– HP MULTI (HEADPHONE MULTI)
– HP THEA (HEADPHONE THEATER)