Sony STR-DB795 Operating Instructions Manual page 38

x SB XXXX
(Surround back decoding mode)
You can use the CUSTOMIZE menu to set the
surround back decoding mode (page 33).
For details on each decoding mode, see page 34.
• OFF
• AUTO
• ON
Note
This parameter is valid only when A.F.D. mode is
selected except for Dolby Pro Logic IIx mode
(page 29).
x S.F XXXX (Sound field link)
• S.F LINK
Lets you apply the last selected sound field to an
input whenever it is selected. For example, if you
select HALL for the SA-CD/CD input, then change
to a different input and return to SA-CD/CD, HALL
will automatically be applied again.
• S.F FIX
Sound field link is not activated.
x DEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
The initial setting is "DEC. AUTO" for VIDEO 3 and
TV/SAT, and "DEC. PCM" for DVD and MD/TAPE.
• DEC. AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
• DEC. PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to "DEC.
PCM". When set to "DEC. AUTO" and the sound
from the digital audio jacks (for CD, etc.) is
interrupted when playback starts, set to "DEC.
PCM".
x D.PWR XXX
(Digital power management)
• D.PWR OFF
Lets you turn off the power of the unnecessary digital
circuits automatically when outputting the analog
audio signals using the ANALOG DIRECT or
MULTI CH IN function. You can enjoy high quality
analog audio without the influence of digital circuits.
• D.PWR ON
Lets you keep the power of digital circuits on. Select
if you do not like the time lag that occurs with the
"D.PWR OFF" setting.
GB
38
x PWR.S. XXX
(CONTROL A1II power save function)
• ON
Lets you save the power consumption of the receiver
during standby mode when the power save function
is activated.
• OFF
Lets you turn on the system automatically when the
component connected via monaural mini-plug cords
(page 44) is turned on.
x DUAL XXX
(Digital broadcast language selection)
Lets you select the language you want to listen to
during digital broadcast. This feature only functions
for Dolby Digital sources.
• M/S (Main/Sub)
Sound of the main language will be output through
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
• M (Main)
Sound of the main language will be output.
• S (Sub)
Sound of the sub language will be output.
• M+S (Main + Sub)
Mixed sound of both the main and sub languages will
be output.
x [DIMMER]
Lets you adjust the brightness of the display.
x NAME IN
(Naming preset stations and inputs)
Lets you set the name of preset stations and inputs
selected with INPUT SELECTOR. For details, see
"Naming preset stations and inputs" on page 41.
Advanced SP SETUP menu
parameters
When "MENU" is set to "MENU EXP.", all of
the following parameters are displayed and
adjustable.
See page 17 for the SP SETUP menu
adjustments. Initial settings are underlined.