Using The Display - Sony SCD-C222ES Operating Instructions Manual

Playing a Disc
7
Press N.
Playback starts from the first track. If you want to start
playing from a specific track, turn lAMSL to
select the track number before pressing N.
8
Adjust the volume on the amplifier.
Basic operations during play
To
Stop play x
Pause play X
Resume play after pausing X or N
Locate a succeeding track Turn lAMSL clockwise
Locate the beginning of the Turn lAMSL
current track or a preceding counterclockwise
track
Go to the next disc DISC SKIP
Select a disc directly DISC 1–5
Eject the disc A OPEN/CLOSE
z
You can select the disc you want to start playing first
Press one of the DISC 1–5 buttons.
z
To select a layer you want to listen to when playing a hybrid
disc (page 10)
After you stop play using x, press SACD/CD repeatedly to light
either "SACD" or "CD".
z
To select a playback area you want to listen to when playing
a 2 channel + Multi-channel Super Audio CD (page 11)
After you stop play using x, press MULTI/2CH repeatedly to
light either "MULTI CH" or "2 CH."
Note
During playback, increase the volume level gradually starting
from the lowest level. The output from this unit may contain
band width that are out of the normal listening range. This may
cause damage to the speakers or ears.
12
US
Press

Using the Display

The display window shows various information about the
disc or track being played. This section describes the
current disc information and information that appears for
each play status.
MENU TIME/TEXT
TIME/TEXT
lAMSL
DISPLAY MODE