Aiwa NSX-MT320 Operating Instructions Manual page 9

TAPE PEiY'i$ACK
2
II
1
++
DOWN,
*UP
= EJECT
Deck 1
Use Type I (normal) tapes only.
1
Press TAPE and press A
cassette holder.
EJECT to open the
A EJECT- -
Insert a tape with the exposed side down. Push the cassette
holder to close.
2
Press > to start play.
Only the side facing out from the unit can be played back.
The selected deck number
To select a playing deck
When tapes are loaded in both decks, press TAPE first to :select
a deck. The selected deck number is displayed.
To stop play, press
.
To pause play (deck 2 only), press 11. To resume play, press
again.
To fast forward or rewind, press ++ or -, Then press M
to stop the tape.
To start play when the power is off (Direct Play Function)
Press TAPE, The power is turned on and play of the inserted
tape begins.
To set the tape counter to 0000
Press CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
When tapes are loaded in both decks
After playback on deck 1 finishes, the tape in the deck 2 will start
to play without interruption and will stop at the end of the tape.
(Continuous play)
Tape counter
ENGLISH 8