Sony MHC-VX222 Operating Instructions Manual page 7

Jack type B
Extend the FM lead antenna
horizontally
AM loop antenna
3 Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cable.
When using a TV
Turn on the TV and select the video input so
you can view the pictures from this system.
Tip
For even higher quality video images, you can use an
optional S-video cable to connect the S VIDEO input
jack on your TV to the S VIDEO OUT jack.
4 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
230 - 240V
V I D E O
O U T
220V 120V
5 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
6 Set the color system to PAL or NTSC
depending on the color system of your
TV while the power is off.
The color system Press
of your TV
?/1 while holding down X.
AUTO (factory
setting) If your TV automatically
changes the color system
according to the input signal,
the system is set to AUTO.
?/1 while holding down
NTSC
>. The system is set to
NTSC.
?/1 while holding down
PAL
.. The system is set to
PAL.
Notes
• You cannot set the color system in the Power
Saving Mode.
• When you play back a VIDEO CD recorded in the
different color system from the one you set to the
unit, the picture image may be distorted.
To connect optional components
See page 29.
continued
7