Playing Your Favorite Cd Independently; Plus One Play - Sony MHC-M500AV Operating Instructions (primary manual) Operating Instructions Manual

Programming the CD tracks
(continued)
To
Check the program Press CHECK repeatedly.
Clear a specific
track or disc
Clear from the last
track or disc
Clear the entire
program
Add tracks or discs
to the end of the
program
Tips
• When you press CD H S, you can play the same
program again.
• When you press PROGRAM during Normal or
Shuffle Play, the program will be played after the
current track.
• If you replace discs, the programmed disc and track
numbers remain until you erase them. So, the
system plays only the existing disc and track
numbers. However, the disc and track numbers that
are not found in the system or on the disc are
deleted from the program, and the rest of the
program is played in the programmed order.
26
You need to
After the last track, "–END–"
appears.
Press CHECK until the track or
disc you want appears, then press
CLEAR.
Press CLEAR. Each time you
press the button, the last track or
disc will be cleared.
Press and hold CLEAR until
"CLEAR" is displayed.
Follow the programming
procedure.
Playing your favorite CD
independently
When you insert a disc into the PLUS ONE slot,
you can play the disc independently from other
discs. When using this function, the system is
automatically set to the 1 DISC play mode.
3
1
Press FUNCTION repeatedly until
"CD" appears in the display.
2
Open the front cover.
3
Press CD PLUS ONE.
"PLUS ONE" appears.
ALL 1 DISC S
PROGRAM
SHUFFLE
REPEAT 1
NEXT
PLUS ONE
DELETE CD TEXT
DISC GROUP
TEXT
FILE
HI-LIGHT
1 2 REC SLEEP

— Plus One Play

2,5 1
TUNED DBFB
MANUAL
AUTO SUR
PRESET
VOLUME
SYNC TRACK ART MONO STEP STEREO
DOLBY NR RELAY
kHz
GROUP
MHz
1 2 3
FILE
4 5