Table of Contents
Advertisement
2 Inserting the SIM card
Notice
The device must be switched off when you insert or change the SIM card.
A plug-in SIM card (ID-000) is used.
Changing the SIM card
If you change the SIM card, please do not forget to update also the PIN number in
your application.
If you use a lot of SIM cards it can be helpful to set all PINs to the same PIN
number. You can do this i.e. by using a mobile phone. Please observe the security
requirements of your organization.
To insert the SIM card proceed as follows:
1. Make sure that the device is disconnected from the supply voltage.
Fehler! Verweisquelle konnte nicht gefunden werden.
2
13
Advertisement
Table of Contents
