Sony MHC-GNZ777D Operating Instructions Manual page 17

A Antennas
Set up the AM loop antenna, then connect
it.
Extend the FM lead
antenna horizontally
B Speakers
The speaker connectors are color-coded
with their respective speaker terminals.
Front speakers
Red
Center speaker
(MHC-GNZ888D only)
Surround speakers
(MHC-GNZ888D only)
Grey
AM loop antenna
White
Green
Blue
Tip
(MHC-GNZ888D only)
Connect the speaker cords to the terminals
on the center and surround speakers.
Black (#)
Black (#)
Notes
• Be sure to use only the supplied speakers.
• Be sure to connect the speakers securely and
correctly. When connecting speaker cords,
insert the connector straight into the
terminals.
C VOLTAGE SELECTOR
For models equipped with a voltage
selector, set VOLTAGE SELECTOR to
the position of your local power line
voltage.
Depending on the model, the VOLTAGE
SELECTOR may differ.
VOLTAGE SELECTOR
220V
240V
120V *
* Saudi Arabian model: 120 - 127V
D Power
Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press "/1 (or "/1 STANDBY
on the unit), the system turns on and the
demonstration automatically ends.
If the supplied adaptor on the plug does
not fit your wall outlet, detach it from the
plug (only for models equipped with an
adaptor). For Saudi Arabian model, see
"Note on power cord plug shapes" on
page 2.
Red (3)
Red (3)
17 GB