Specifications - Sony LBT-D590 Operating Instructions Manual

Micro & mini shelf systems: compact hifi stereo system
Hide thumbs Also See for LBT-D590:
Table of Contents

Advertisement

Specifications

For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
70 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
Continuous RMS power output
(LBT-D290/D590/D690/D990/G3300)
Canadian model:
(LBT-XB3/XB3K/XB30)
(LBT-XB4/XB4K)
(LBT-XB600/XB6/XB6K) 100 + 100 watts
Peak music power output
(LBT-XB3/XB3K/XB30)
(LBT-XB4/XB4K)
(LBT-XB600/XB6/XB6K) 1,400 watts
Inputs
PHONO IN (phono jacks):
VIDEO (AUDIO) IN (phono jacks):
MIX MIC (phone jack):
Outputs
PHONES (stereo phone jack):
SPEAKER:
(LBT-D290/D590/D690/D990/G3300/XB600/XB6/
XB6K)
(LBT-XB3/XB3K/XB30)
(LBT-XB4/XB4K)
SURROUND SPEAKER
(LBT-D590/D690/D990/XB600/XB6/XB6K only)
40
100 + 100 watts
(8 ohms at 1 kHz, 5%)
70 + 70 watts
(6 ohms at 1 kHz, 10%
THD)
80 + 80 watts
(5 ohms at 1 kHz, 10%
THD)
(8 ohms at 1 kHz, 10%
THD)
1,000 watts
1,200 watts
sensitivity 3 mV,
impedance 47 kilohms
sensitivity 250 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
accepts headphones of 8
ohms or more
accepts impedance of 8 to
16 ohms.
accepts impedance of 6 to
16 ohms.
accepts impedance of 5 to
16 ohms.
accepts impedance of 16
ohms
CD player section
System
Laser
Laser output
Wavelength
Frequency response
Signal-to-noise ratio
Dynamic range
Tape player section
Recording system
Frequency response (DOLBY NR OFF)
Wow and flutter
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
North American model:
Other models:
Antenna
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
North American model:
Other models:
Antenna
Intermediate frequency
Compact disc and digital
audio system
Semiconductor laser
( = 780 nm)
Emission
duration: continuous
Max. 44.6 F*
* This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
780 – 790 nm
2 Hz – 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB
4-track 2-channel stereo
60 – 13,000 Hz ( ±3 dB),
using a Sony TYPE I
cassette
60 – 14,000 Hz ( ±3 dB),
using a Sony TYPE II
cassette
±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
87.5 – 108.0 MHz
(100 kHz step)
87.5 – 108.0 MHz
(50 kHz step)
FM wire antenna
75 ohm unbalanced
10.7 MHz
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,710 kHz
(with the tuning interval
set at 9 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
AM loop antenna,
External antenna
terminals
450 kHz

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents