2.4 How to connect in Wi-Fi mode
Step 1: Enabling Wi-Fi on your Cat7 Router.
When the Wi-Fi indicator is solid blue, Wi-Fi is enabled.
Step 2: Recording the SSID and Wi-Fi Key.
The default SSID and Wi-Fi key are printed on the device label, situated on the
underside of your Cat7 Router.
To prevent unauthorised parties from accessing your Wi-Fi network, it is
recommended that you change the SSID and Wi-Fi key from time to time. For
more information, please refer to the User Guide which can be accessed via the
Web User Interface.
Step 3: Setting up a Wi-Fi connection
•
1)
From your Wi-Fi enabled client, perform a scan for wireless networks.
2)
Connect to the network name that matches the SSID found on the device
label.
3)
When prompted for a password, enter the Wi-Fi key found on the device
label (this is case sensitive). Your client will notify you when it is connected.
•
Your client must support WPS. There are 3 ways to set up a WPS connection.
Option 1: WPS button
1)
Ensure that Wi-Fi is enabled on the client and enable WPS.
2)
Press and hold the WPS button for 3 seconds. The Wi-Fi LED will begin to
flash blue.
3)
Your device should then automatically connect.
Option 2: WPS key
1)
Enable the WPS function on your smart device (only Android devices are
supported) and note the WPS key.
XXXXXXXXX
10