Outline Of Operation Control By Microcomputer - Mitsubishi Heavy Industries SRR25ZM-S Technical Manual

10. OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

(1) Operation control function by wireless remote control
Operation section
OPERATION MODE select button
Each time the button is pressed, the mode
changes.
TEMPERATURE button
This button sets the room temperature.
HI/ECO button
This button changes the HIGH POWER/
ECONOMY operation.
SILENT button
This buttion changes the SILENT
operation.
ON TIMER button
This button selects ON TIMER operation.
OFF TIMER button
This button selects OFF TIMER
operation.
WEEKLY button
This button switches the WEEKLY
TIMER to ON/OFF.
CLEAN switch
This switch selects the CLEAN
operation.
SLEEP button
This button selects SLEEP operation.
Unit display section Unit display section
Unit display section
RUN (HOT KEEP) light (green)
Wireless remote control signal receiver
・Illuminates during operation.
・Blinks when airflow stops due to the'HOT
KEEP'and'CLEAN operation'.
Unit ON/OFF button
This button can be used for turning on/off the unit when
remote control is not available. ON
HOT KEEP
OFF
ON
CLEAN operation
OFF
ON
RUN (HOT KEEP) light (green)
Operation mode
invalid
• Illuminates during operation. OFF
• Blinks when airflow stops due to the 'HOT
KEEP' and 'CLEAN operation'.
TIMER light (yellow)
1.5 sec.
ON
Illuminates during TIMER operation.
HOT KEEP
OFF
3 sec.
ON
CLEAN operation
OFF
•The above illustration shows all controls, but in
practice only the relevant parts are shown.
1.5 sec.
0.5 sec.
3 sec.
R U N I T M E R
1 sec.
0.5 sec.
0.5 sec.
0.5 sec.
Operation mode
invalid
1 sec.
HI POWER E C O N O
ON/OFF
Illuminates during ECONOMY operation.
Illuminates during HIGH POWER operation.
Illuminates during TIMER operation.
0.5 sec.
ON
OFF
0.5 sec.

- -
'15 • SR-T-185
Transmission section
ON/OFF (luminous) button
Press to start operation, press again to
stop.
FAN SPEED button
Each time the button is pressed, the fan
speed changes.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down)
direction.
NIGHT SETBACK button
This button sets NIGHT SETBACK
operation.
SET/Child Lock button
Use this button to set the timer and
Child Lock.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
TIMER button
This buttions is used for setting the cur-
rent time and timer function.
PROGRAM button
This button sets WEEKLY TIMER.
ACL switch
Switch for resetting microcomputer.
TIME SET UP switch
This switch is for setting the time.
Wireless remote control signal receiver
Unit ON/OFF button
This button can be used for turning on/off the
unit when wireless remote control is not available.
ECONO light (orange)
HI POWER light (green)
HI POWER light (green)
Illuminates during HIGH POWER operation.
ECONO light (orange)
TIMER light (yellow)
Illuminates during ECONOMY operation.