Labeling An Md - Sony DHC-EX770MD Operating Instructions Manual

Labeling an MD

You can create titles (names) for your
recorded MDs and tracks. You can use up to
1,700 characters for a disc.
4
r REC
SCROLL
1
To label a disc, press p and stop
playing the disc.
To label a track, turn SELECTOR
until the desired track number
appears.
2
Press EDIT/NO repeatedly until
"Name in ?" appears.
3
Press ENTER/YES.
The cursor starts flashing.
EN
50
5 6
0
§
EJECT
0 10
= SELECTOR +
· ∏
0 )
p
§
OPEN/CLOSE
2 3,8 1
= SELECTOR +
· ∏
0 )
p
Cursor
4
Press DISPLAY/CHARACTER
repeatedly until the desired type of
character appears.
Each time you press the button, the
display changes as follows:
A (Upper cases) n a (Lower cases)
n 0 (Numbers and Symbols*) n A...
*You can use the following symbols:
! " # $ % & ' ( ) * + , – . / : ; < = > ? @ _ `
5
Turn SELECTOR until the character
you want appears.
The selected character flashes. To enter a
blank space, press ) while the cursor
is flashing.
6
Press ) to enter the character.
The cursor shifts rightward and waits for
the input of the next character.
7
Repeat steps 4 to 6 to complete the
entire title.
If you made a mistake, press 0 or )
until the character you want to change
flashes, then repeat steps 4 to 6.
To erase the character, press EDIT/NO
while the character is flashing.
8
Press ENTER/YES to complete the
labeling procedure.
The titles you entered appear
sequentially.