Setting the timer/alarm
The timer switches your DMX-20 on (if in standby) at a specified time and tunes to a radio station
or sounds a tone alarm for the period you set.
Setting up a timer/alarm
Select the type of alarm (DAB, FM or Alarm tone), volume, start time, end time and repeat.
The TIMER symbol is displayed when the timer or alarm is set. If you want the alarm to repeat
at the same time each day change the repeat setting to 'Everyday'.
Switching a timer/alarm on/off
On
Cancelling a timer/alarm
TIMER
Using the sleep timer
The sleep timer switches your radio into standby after a number of minutes. The SLEEP symbol
is displayed when the timer or alarm is set.
Setting the clock
STANDBY/ON
The clock is normally set and updated from the DAB signal while the unit is switched on (not
updated in standby). If you have poor DAB reception or want to manually adjust the time you
can switch this option off and set the clock yourself.
8
TIMER
Off
or
SLEEP
TIMER
STANDBY/ON
or