Optional Components; Connecting Audio Components - Sony CMT-LS1 Operating Instructions Manual

Waking up to music (continued)
To change the setting
Start again from step 1.
To check the setting / To use the
timer
Press CLOCK/TIMER SELECT repeatedly until
"DAILY" appears. The start time, followed by the
stop time, the music source appears, then the
original display appears.
To cancel Daily Timer
Press CLOCK/TIMER SELECT repeatedly until
"TIMER OFF" appears.
Tip
When you set Daily Timer, the system turns on
15 seconds before the preset time.
24

Optional Components

Connecting audio
components
To enhance your system, you can connect optional
components. Refer to the instructions of each
component.
Connecting an MD deck for
digital recording
You can record from CD into the MD deck
digitally by connecting an optical cable (not
supplied).
To the DIGITAL IN jack of the MD deck
Connecting a tape deck
To listen to the sound of the connected tape deck,
press FUNCTION repeatedly until "TAPE"
appears.
To connect a tape deck to the system, use an audio
connecting cord with a stereo mini plug on one
end and RCA pin plugs on the other end.