Sony CMT-LS1 Operating Instructions Manual page 13

1
Press DISC 1 – 5 to select a disc tray,
then press A on the unit.
2
Insert a CD and push it down lightly.
Note
You cannot play a 8 cm CD.
With the label side front
A box appears around the selected disc
number in the display when the disc is
loaded.
3
Press PLAY/TUNING MODE on the
remote repeatedly to select the playing
mode.
Each time you press the button, the mode
changes;
MODE
ALL DISCS
1 DISC
ALL DISCS
SHUFFLE
1 DISC SHUFFLE
DISC PROGRAM
Playing
all the tracks on all CDs.
all the tracks on the
current CD.
all the tracks on all CDs
in random order (see
page 16).
all the tracks on the
current CD in random
order (see page 16).
desired tracks on all CDs
in the order you
programed (see page 17).
4
Press CD N (or NX on the unit).
Play starts and the playing disc number is
displayed.
Disc tray number
To start playing a different CD, press
DISC 1 – 5 to select the desired disc.
To Do this
Press x.
Stop play
Press X (or NX on the
Pause
unit). Press again to resume
play.
Press . or > repeatedly
Select a track
until you find the desired
track.
Find a point in a track Press and hold m or M
during play and release it at
the desired point.
Select a CD • Press DISC SKIP on the
remote repeatedly so that a
box appears around DISC 1
– 5 in the display. Press
CD N (or NX on the
unit) to play the selected
CD.
• Press DISC 1 – 5 on the
unit. Play starts when the
button is pressed.
If you press DISC 1 – 5 (or
DISC SKIP on the remote)
during play, the selected CD
changes and the new CD
starts playing.
Remove a CD Press DISC SKIP on the
remote repeatedly to select the
CD you want to remove. Open
the front panel and press A on
the unit.
Adjust the volume Press VOL +/–.
Playing time
Track number
continued
13