Tape - Play; Loading A Tape; Playing A Tape - Sony CMT-HP7 Operating Instructions Manual

Tape – Play

Loading a tape

1
Slide the lid open with your hand.
2
Insert a tape.
With the side
you want to
play/record
facing up.
To remove the tape, lift up the tape from the
side as shown in the illustration.
3
Slide the lid close with your hand.
GB
16

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press TAPE A/B on the remote (or
FUNCTION on the unit repeatedly) until
"TAPE" appears.
3
Press PLAY MODE repeatedly to select
"g" to play one side, "h" to play
both sides, or "j"* to play both sides
repeatedly.
* The tape automatically stops after playing back
five times.
4
Press N on the remote (or TAPE
nN on the unit).
The tape starts playing.
Press TAPE nN on the unit again to
play the reverse side.
Other operations
To Do this
Press x.
Stop play
Press X. Press again to resume
Pause
play.
Press m/M.
Fast-forward or
rewind
Finding a point in a track (Cue
and Review)
To go forward
Press M during playback, then press N on
the remote (or TAPE nN on the unit) at the
desired point.
To go back
Press m during playback, then press N on
the remote (or TAPE nN on the unit) at the
desired point.