Miele KM 6520 FR Operating And Installation Instructions page 59

Granite and marble worktops
You will need heavy duty double-sided
adhesive tape (not included with the
cooktop) to fasten the spring clips.
 Attach the adhesive tape  along the
top edge of the cut-out in the
positions shown in the cooktop
illustration.
 Position the spring clips on the top
edge of the cut-out and press them
firmly into place.
 Apply silicone adhesive to the side
edges and bottom edge of the spring
clips.
Installing the cooktop
 Feed the mains connection cable
down through the cut-out.
 Position the cooktop in the worktop
cut-out.
 Using both hands, press down evenly
on the sides of the cooktop until it
clicks into position. When doing this
make sure that the seal of the
appliance sits flush with the worktop
on all sides. This is important to
ensure an effective seal all round.
If the seal does not meet the worktop
correctly on the corners, the corner
radii (≤ R4) can be carefully scribed to
suit.
Do not use any additional sealant
(e.g. silicone).
 Connect the cooktop to the mains
electricity supply.
 Check that the cooktop works.
The cooktop can only be removed
using a special tool.
Installation
59